Electronic Leak Detection (Acoustic / Thermal) in Orange County, CA
When water is escaping behind walls, under slabs, or in ceilings, guesswork wastes time and money. White Glove Plumbing & Restoration provides electronic leak detection (acoustic/thermal) that uses listening correlators, ground mics, infrared thermography, pressure testing, and tracer gas to locate leaks precisely—so repairs are targeted, code-compliant, and minimally invasive.
✓ Discreet arrival: Privacy-first, unmarked vehicles available
✓ Licensed diagnostics: Code-aware testing and isolation
✓ Instrumented findings: Acoustic, thermal, and pressure data—documented
✓ Clean pinpoint: Marked locations with photo/video summary
✓ Discreet arrival
✓ Licensed diagnostics
✓ Instrumented findings
✓ Clean pinpoint
What Is Electronic Leak Detection?
A diagnostic service that isolates plumbing zones and uses acoustic listening/correlation to trace leak noise through piping, infrared (thermal) cameras to visualize temperature anomalies (hot-line leaks, evaporative cooling), pressure testing to verify holds, and tracer gas (non-toxic H₂/N₂ mix with electronic sniffers) where appropriate.
The goal is a precise, marked location that enables small, efficient repairs and verification testing.
Why Choose White Glove Plumbing
Compliance & safety first: Technicians trained in safe shutdown, pressure testing, and building-code repair standards.
Documented chain of evidence: Pressure logs, IR images, acoustic recordings, and measurements included on request.
Beyond detection: We can perform the repair and, if needed, mitigate water damage the same visit.
Minimal disruption: Targeted opening and clean containment to protect finishes.
Immediate Actions (What to Do Now)
Shut off water to the suspected zone or main if safe to do so.
Note symptoms (sounds, hot spots on floor, meter spinning) and when they occur.
Clear access to mechanical rooms, meters, and affected rooms/ceilings.
Do not open walls/slabs—let us locate first to minimize demolition.
Call our 24/7 dispatcher—we’ll isolate, test, and pinpoint before repairs.
Common Situations We Handle
Slab leaks (hot or cold supply) and warm floor spots
Wet ceilings/walls with no visible source
Constantly spinning water meters / unexplained high bills
Hidden leaks in multi-family or mixed-use risers
Radiant floor & manifold leaks
After-hours commercial leaks where downtime must be minimized
Secure & Survey
Confirm scene safety; review symptoms, meter behavior, recent work; map supply zones and likely pipe runs.
Isolation & Baseline Testing
Close/label valves; perform static/dynamic pressure tests; observe meter spin and pressure decay to confirm active loss.
Acoustic Mapping
Use ground mics and listening correlators on accessible pipe, slab, and fixtures to track noise gradients toward a source.
Thermal & Moisture Imaging
Deploy infrared thermography to reveal hot-line tracks and evaporative cooling; moisture meters to outline wet areas.
Correlation & Confirmation
Cross-check acoustic hot spots with IR/measurement data; where needed, introduce tracer gas and use electronic sniffers to confirm the point.
Pinpoint, Mark & Close-Out
Mark location with measurements from fixed references; provide photos/IR captures; deliver a repair plan and, after repairs, re-test/verify.
What’s Included
System isolation & safety checks (valves, electrical awareness, access)
Pressure and meter diagnostics (static/dynamic tests, spin/decay)
Acoustic survey & correlation (ground mic, correlator, logger as indicated)
Thermal imaging & moisture mapping (IR camera, meters)
Pinpoint marking & documentation (photos/IR, measurements, summary)
Repair options & estimate; optional post-repair verification
Costs & Timelines (What to Expect)
Typical duration: Many residential pinpoints are same visit; complex commercial stacks or radiant loops may require phased testing.
Cost drivers: Construction type (slab/tile/concrete), access and ambient noise, pipe materials, after-hours windows, and need for tracer gas or extensive correlation.
Clear estimate: Line items for diagnostics, optional tracer gas, targeted opening, and verification—no surprises.
Insurance & Compliance Support
Records your stakeholders expect: Pressure logs, IR imagery, acoustic notes, and a written location report.
Policy alignment: We follow building SOPs, provide COIs, and coordinate with property management/HOA.
Coverage varies: We can separate diagnostics vs. repair for claims clarity.
Risks of Waiting (Why Act Now)
Escalating structural damage (subfloor, framing, finishes)
Mold growth & odors from prolonged moisture
Electrical and slip hazards in occupied spaces
Higher water bills and potential code issues
Methods, Materials & Quality Standards
PPE: Nitrile gloves, eye/face protection; hearing protection for acoustic work.
Instruments: Ground mics, digital correlators, data loggers, infrared cameras, moisture meters, tracer gas (≈5% H₂ / 95% N₂) with calibrated detectors.
Procedures: Valve-by-valve isolation, static/dynamic pressure testing, documented measurement from fixed references.
Site care: Finish-safe marking, dust control, clean containment for any exploratory openings.
Training: Safe shutdown, instrument calibration/usage, code-compliant repair practices.
Frequently Asked Questions
How accurate is the pinpoint?
Typical residential pinpoints are within inches, depending on construction, noise, and pipe depth. We mark and measure from fixed references.
Will you open walls or the slab?
Only if authorized after pinpointing. We aim for minimal, finish-aware access and can perform the repair.
Is tracer gas safe?
Yes—the H₂/N₂ mix is non-toxic and non-corrosive; we ventilate and control ignition sources during use.
Can you find drain or roof leaks too?
We primarily locate pressurized supply leaks. For drains/vents we use cameras, smoke/dye testing, and moisture mapping.
Do you provide proof for insurance?
Yes—photos, IR captures, pressure results, and a written report are available.
More White Glove Plumbing Emergency Plumbing Services
Proudly Serving All of Orange County
Address: 1430 E Borchard Ave, Santa Ana, CA 92705
Phone: (949) 209-5206
Email: office@whitegloveplumbingca.com
White Glove Plumbing is locally based in Santa Ana and serves residential and commercial clients across Orange County with 24/7 emergency plumbing and water-damage restoration.
Our expert team handles leak detection, emergency plumbing, water extraction/dry-out, sewage cleanup, mold remediation, and reconstruction in top OC areas including Irvine, Anaheim, Santa Ana, Orange, Tustin, Costa Mesa, Newport Beach, Huntington Beach, Mission Viejo, Lake Forest, Fullerton, Yorba Linda, Laguna Beach, Dana Point, and San Clemente - plus surrounding neighborhoods.
Let’s start a conversation
Book Your Free Consultation call Now
Contact us:
CALL (949) 209-5206
1430 E Borchard Ave, Santa Ana, CA 92705