Lead & Copper Testing in Orange County, CA
Lead and copper can enter water from older pipes, solder, and fixtures. Our lead & copper testing service uses correct first-draw and follow-up samples, documented chain-of-custody, and accredited labs—so you get defensible results and a clear remediation plan.
✓ Proper samples: first-draw and flush
✓ Lab verified: accredited analysis
✓ Clear report: easy thresholds
✓ Action plan: fixes that work
✓ Proper samples
✓ Lab verified
✓ Clear report
✓ Action plan
What Is Lead & Copper Testing?
A structured program to measure lead (Pb) and copper (Cu) at the tap via first-draw (after a set stagnation period) and optional post-flush samples.
Results identify whether metals are leaching from service lines, solder, or fixtures, guiding repairs, replacements, or filtration. (This is a water chemistry test—not medical advice.)
Why Choose White Glove Plumbing
Compliance & safety first: Sampling follows first-draw/standing time guidance; chain-of-custody maintained.
Defensible documentation: Accredited lab reports, photos of sample points, and a summary that compares results to local/EPA guidance.
Beyond testing: Options for fixture replacement, point-of-use filtration (NSF/ANSI 53/58), partial piping upgrades, and corrosion control referrals.
One accountable team: We can install certified filters, replace lead-suspect components, and coordinate re-testing to confirm improvement.
Immediate Actions (What to Do Now)
Choose sample points (kitchen tap, kid-use baths, break rooms).
Do not flush the night before testing—let water sit per instructions.
Gather info on plumbing age, brass/bronze fixtures, and any filters.
Avoid DIY shock chlorination before sampling.
Call our 24/7 dispatcher—we’ll schedule testing and prep kits.
Common Situations We Handle
Homes built before 1988–1990 with legacy solder/fixtures
Schools/childcare needing documented tap-by-tap results
Buildings after plumbing work or fixture replacements
Taste/metallic sheen or blue/green staining (copper)
Well users or buildings with stagnation and dead-legs
Site Walk & Plan
Map priority taps; review plumbing age, materials, and any filters or softeners; select first-draw and flush sequence.
Sampling Prep
Provide instructions on stagnation period; label bottles; record tap conditions (aerator status, hot/cold configuration).
Collect Samples
Take first-draw samples at designated taps, then post-flush or sequential liter samples where indicated; complete chain-of-custody.
Accredited Lab Analysis
Deliver to an accredited laboratory for lead/copper; optional pH/alkalinity to understand corrosivity.
Results & Interpretation
Compile a plain-English report with maps of taps, numeric results, threshold comparison, and source clues (fixture vs. service line).
Action Plan & Re-Test
Recommend fixes—NSF-certified filters, fixture/supply line swaps, aerator cleaning, targeted piping upgrades—and schedule confirmatory testing.
What’s Included
First-draw and optional flush/sequential samples
Chain-of-custody and accredited lab analysis
Results report with tap map and thresholds
Source assessment (fixture vs. upstream indicators)
Remediation options with prioritized steps and pricing
Follow-up re-testing plan to verify improvement
Costs & Timelines (What to Expect)
Typical duration: On-site collection 30–90 minutes; lab turnaround standard or rush options.
Cost drivers: Number of taps, rush analysis, optional parameters (pH/alkalinity/metals panel), and re-testing rounds.
Clear estimate: Line items for sampling, lab fees, report, and any remediation—no surprises.
Insurance & Compliance Support
School/PM-ready packets: Tap lists, photos, lab certificates, and summary tables for stakeholders.
Local/EPA alignment: Results framed against current guidance/action levels and record-keeping needs.
Documentation for grants/rebates: We’ll package results and scope for funding applications where applicable.
Risks of Waiting (Why Act Now)
Ongoing exposure risk at priority taps
Corrosion damage to fixtures and finish surfaces
Undiagnosed leaching from legacy components
Costly rework if upgrades proceed without data
Methods, Materials & Quality Standards
Sampling: Correct stagnation, first-draw volume, labeled bottles; minimal disturbance of plumbing prior to sampling.
Analysis: Accredited lab methods with low detection limits.
Controls: Chain-of-custody, duplicates/field blanks on multi-tap projects.
Remediation gear: NSF/ANSI 53 (lead) / 58 (RO) certified filters, lead-free 3rd-party-listed fixtures/supplies, proper flux and solder for any repairs.
Frequently Asked Questions
Is flushing required before sampling?
For first-draw lead/copper, water should sit undisturbed for the specified period. We’ll provide exact timing.
Should I remove aerators?
We follow the chosen protocol. If debris is suspected, we’ll note aerator status and may sample both ways for clarity.
What if my results are high?
Short-term: NSF-certified filters at priority taps. Long-term: fixture/supply line replacements or targeted piping upgrades. We’ll outline both.
Can you test hot water?
Lead testing focuses on cold-water taps used for consumption. We can sample hot lines as a diagnostic if needed.
Will a softener fix lead?
No. Use NSF-certified lead-reduction filtration or address the source materials.
Do you notify authorities?
For schools or regulated sites, we’ll follow your policy and assist with any required notifications.
More White Glove Plumbing Water Testing Services
Proudly Serving All of Orange County
Address: 1430 E Borchard Ave, Santa Ana, CA 92705
Phone: (949) 209-5206
Email: office@whitegloveplumbingca.com
White Glove Plumbing is locally based in Santa Ana and serves residential and commercial clients across Orange County with 24/7 emergency plumbing and water-damage restoration.
Our expert team handles leak detection, emergency plumbing, water extraction/dry-out, sewage cleanup, mold remediation, and reconstruction in top OC areas including Irvine, Anaheim, Santa Ana, Orange, Tustin, Costa Mesa, Newport Beach, Huntington Beach, Mission Viejo, Lake Forest, Fullerton, Yorba Linda, Laguna Beach, Dana Point, and San Clemente - plus surrounding neighborhoods.
Let’s start a conversation
Book Your Free Consultation call Now
Contact us:
CALL (949) 209-5206
1430 E Borchard Ave, Santa Ana, CA 92705