Water Line Repair / Replacement in Orange County, CA
A failing water line can spike bills, drop pressure, and flood landscaping or interiors. White Glove Plumbing & Restoration provides water line repair/replacement for homes, HOAs, and commercial sites—pinpointing the failure, stabilizing your system, and restoring service using targeted spot repairs or full replacements (traditional trench or trenchless) with clear documentation.
✓ Licensed diagnostics: Pressure, acoustic, and line-locating to confirm the failure
✓ Trenchless capable: Bore/pipe-bursting/pull-in HDPE or copper where feasible
✓ Minimal disruption: Clean access planning, utility locates, and surface protection
✓ Clean finish: Pressure tested, flushed, and documented for inspections
✓ Licensed diagnostics
✓ Trenchless capable
✓ Minimal disruption
✓ Clean finish
What Is Water Line Repair / Replacement?
A service that locates and fixes pressurized potable water lines from the meter/utility connection to the building (and, when requested, interior mains/branches).
Depending on pipe condition, code, and access, we perform targeted repairs or complete line replacement using Type L copper, PEX-A, or CTS-rated HDPE via open trench or trenchless methods (bore/pipe-burst/pull-through). We then pressure-test, flush/sanitize, and document the route and results.
Why Choose White Glove Plumbing
Compliance & safety first: Technicians trained in code-compliant installation, backflow/PRV considerations, and safe shutdown.
Defensible documentation: Pressure logs, photos, depth/route notes, and materials listed by footage.
Best-fit methods: From spot clamps and sectional copper/PEX repairs to full HDPE/copper replacements (trenchless where possible).
One accountable team: If water intrusion occurred, our mitigation crew extracts, dries, and disinfects the same engagement.
Immediate Actions (What to Do Now)
Shut off the main (at meter or house valve) if flow is active and safe to do so.
Check the meter—if it spins with all fixtures off, you likely have a leak.
Avoid driving/excavating over suspected leak areas; note soft ground or hissing.
Clear access to the meter box, hose bibs, and mechanical room.
Call our 24/7 dispatcher—we’ll isolate, diagnose, and outline repair or replacement.
Common Situations We Handle
High bill/meter spin with no fixtures running
Soft/wet spots in yard or slab-adjacent soil
Low pressure / air in lines from underground leaks
Aged galvanized or thin-wall copper service lines
Root/soil movement damage and prior patch failures
Upsizing service for remodels or ADUs
Secure & Survey
Verify shutoffs, check meter spin/pressure, locate utilities, map likely pipe route and depths.
Confirm & Mark
Electronic line locating, acoustic checks, and (as needed) test pits to confirm material and failure zone; obtain permits.
Select Method
Choose spot repair, sectional replacement, or full line replacement via open trench or trenchless (bore/pipe-burst/pull-through) based on code, obstacles, and condition.
Execute Repair/Replacement
Install Type L copper, PEX-A, or CTS-HDPE with proper bedding, sleeving, thrust blocks (as required), and new shutoff/PRV if indicated.
Pressure Test, Flush & Sanitize
Perform documented pressure holds; flush until clear and sanitize per best practice; restore service and balance.
Verification & Close-Out
Backfill/compact, surface restoration (basic), photo summary, as-built route notes, and maintenance guidance.
What’s Included
-
Diagnostics & utility locates (811 coordination and site mapping)
-
Permits/inspections coordination as required
-
Targeted repair or full replacement (trenchless/trench per site and code)
-
New valves/PRV/backflow components as indicated
-
Pressure test, flush/sanitize, and start-up
-
Documentation packet (photos as appropriate, pressure logs, route/depth notes)
Costs & Timelines (What to Expect)
Typical duration: Same-day spot repairs; many full replacements finish in 1 day; complex bores may be phased.
Cost drivers: Length/depth, surface restoration needs (hardscape/landscape), utilities/conflicts, material choice, permits/after-hours windows.
Clear estimate: Line items for diagnostics, method, materials, restoration, and reporting—no surprises.
Insurance & Compliance Support
-
Records your stakeholders expect: Time-stamped notes, pressure results, materials by footage, permit/inspection details.
-
Policy alignment: We follow SOPs, provide COIs, and can separate plumbing vs. mitigation on invoices.
-
Water quality: Post-repair flushing/sanitizing and aerator cleaning guidance to clear turbidity.
Risks of Waiting (Why Act Now)
-
Escalating subsurface erosion and slab/foundation impacts
-
Mold/odor from ongoing moisture migration
-
Electrical/slip hazards and landscape collapse
-
Rising water bills and potential utility notices
Methods, Materials & Quality Standards
PPE & safety: Nitrile gloves, eye/face protection, trench safety and locate compliance.
Materials: Type L copper, PEX-A, CTS-HDPE, full-port ball valves, dielectric protection, PRV/backflow components where required.
Installation: Correct bedding/compaction, sleeving through foundations, freeze/UV protection, and thrust restraint as needed.
Testing: Documented static/dynamic pressure holds; meter/fixture run-ups.
Site care: Protect hardscape/landscape; clean egress; finish-aware restoration options.
Training: Code-compliant installation, utility-aware excavation, inspection readiness.
Frequently Asked Questions
Do I need a full replacement, or can you spot-repair?
We’ll assess pipe condition and history. Spot repairs fix isolated failures; full replacements are recommended for widespread corrosion or chronic leaks.
Can you go trenchless under driveways or patios?
Often, yes—bore, pipe-bursting, or pull-through methods can bypass hardscape depending on utilities and soil.
What pipe material do you recommend?
Site and code dependent. CTS-HDPE is excellent for trenchless/service runs; Type L copper remains a standard; PEX-A may be used for interior transitions.
Will water look cloudy after the repair?
Temporary turbidity/air is common. We flush/sanitize and provide guidance to clear lines quickly.
Do you handle permits and inspections?
Yes—we pull permits, schedule inspections, and provide a documentation packet.
Can you upsize my line for better pressure?
We can evaluate demand and upsize service where code and meter allow, often paired with PRV adjustments.
More White Glove Plumbing Emergency Plumbing Services
Proudly Serving All of Orange County
Address: 1430 E Borchard Ave, Santa Ana, CA 92705
Phone: (949) 209-5206
Email: office@whitegloveplumbingca.com
White Glove Plumbing is locally based in Santa Ana and serves residential and commercial clients across Orange County with 24/7 emergency plumbing and water-damage restoration.
Our expert team handles leak detection, emergency plumbing, water extraction/dry-out, sewage cleanup, mold remediation, and reconstruction in top OC areas including Irvine, Anaheim, Santa Ana, Orange, Tustin, Costa Mesa, Newport Beach, Huntington Beach, Mission Viejo, Lake Forest, Fullerton, Yorba Linda, Laguna Beach, Dana Point, and San Clemente - plus surrounding neighborhoods.
Let’s start a conversation
Book Your Free Consultation call Now
Contact us:
CALL (949) 209-5206
1430 E Borchard Ave, Santa Ana, CA 92705