Salt-Free Conditioner Installation in Orange County, CA
Want less scale without the salt, drain, or regeneration? Our salt-free conditioner (TAC) installs convert hardness minerals into micro-crystals that don’t stick to pipes, heaters, or fixtures. It’s not a softener (TDS and “feel” stay the same), but it cuts scale buildup and cleanup—great for homes, tankless heaters, and light-commercial.
✓ Scale control: micro-crystal technology
✓ No salt/brine: eco-friendly operation
✓ Low maintenance: no regen/electric
✓ Keeps flow & feel: TDS stays the same
✓ Scale control
✓ No salt/brine
✓ Low maintenance
✓ Keeps flow & feel
What Is Salt-Free Conditioner Installation (TAC)?
A Template-Assisted Crystallization system that conditions water by turning dissolved hardness into stable micro-crystals that don’t adhere to hot surfaces. It does not remove hardness (no ion exchange), so TDS and feel remain, but scale sticks far less and wipes off easier.
Proper pretreatment (sediment, iron/manganese removal, and carbon for high disinfectant residuals) ensures long media life.
Why Choose White Glove Plumbing
Compliance & safety first: Proper bypass, accessible shutoffs, and code-correct tie-ins (no drain required).
Defensible documentation: Hardness/TDS numbers, flow sizing, and a startup verification checklist.
Beyond TAC: Sediment & carbon prefilters, scale-sensitive appliance protection, and post-filter performance testing.
One accountable team: We service tank/tankless/heat pump heaters, tune recirculation, and maintain filters on schedule.
Immediate Actions (What to Do Now)
Share water results (hardness, iron/manganese, chlorine/chloramine).
Tell us appliances (tankless, heat pump water heater, espresso/ice).
Pick an install spot near the main with 120V outlet (if prefilter needs).
List cold lines to bypass (irrigation, hose bibs, fridge if desired).
Call our 24/7 dispatcher—we’ll test, confirm pretreatment, and size your TAC.
Common Situations We Handle
Tankless scale or frequent descaling cycles
Spots/film on fixtures and glass (want easier cleanup)
No drain available for a softener regeneration line
Salt restrictions or preference to avoid salt bags/brine
Light iron/manganese/chlorine needing pretreatment before TAC
Test, Survey & Size
Measure hardness, TDS, iron/manganese, chlorine/chloramine, flow & pressure; select media volume to match service flow.
Pretreatment Plan
Specify sediment and, if needed, carbon (for chlorine/chloramine) and iron/manganese removal to meet media requirements.
Set & Plumb
Mount housings/tank; install full-port isolation, unions, and a labeled bypass; route irrigation/hose bibs around the conditioner.
Flow Direction & Protection
Verify upflow orientation (per media spec), set flow restrictor if required, and insulate exposed lines.
Commission & Verify
Flush to clear fines; check pressure drop and service flow; confirm heater/recirc settings and perform a baseline spot/rinse test.
Handover & Schedule
Provide photos, model/media lot, pretreatment settings, and a filter/media service cadence with optional follow-up check.
What’s Included
On-site testing & flow sizing
TAC media tank with bypass and unions
Sediment/carbon prefilter (as scoped)
Code-correct tie-ins and neat routing
Startup flush & verification checklist
Documentation packet (settings, photos, schedule)
Costs & Timelines (What to Expect)
Typical duration: 2–5 hours depending on pretreatment scope.
Cost drivers: Media/tank size, pretreatment filters, rerouting for bypassed lines, and access.
Clear estimate: Line items for equipment, pretreatment, plumbing, and documentation—no surprises.
Insurance & Compliance Support
Inspector-friendly: Accessible shutoffs, labeled bypass, and manufacturer data sheets.
Policy alignment: Local plumbing code and device listings; COIs for HOAs/PMs.
Warranty help: We document water quality and pretreatment that protect media life.
Risks of Waiting (Why Act Now)
Ongoing scale on heaters, valves, and glass
Higher energy use from heat-exchange scale
Frequent descaling and shortened appliance life
Finish damage and time-consuming cleanup
Methods, Materials & Quality Standards
Media: TAC resin rated for potable use; upflow configuration per spec.
Pretreatment thresholds: Address sediment/iron/manganese and high chlorine/chloramine ahead of TAC to protect media.
Hydraulics: Size to service flow (SFR); keep pressure drop low and ensure adequate contact time.
No salt/brine: No regeneration, no drain line; minimal maintenance beyond filters.
Verification: Baseline photos/readings and follow-up spot/scale checks as requested.
Frequently Asked Questions
Is TAC the same as softening?
No. TAC conditions water; it doesn’t remove hardness. TDS and “feel” remain similar, but scale sticks far less.
Will spots disappear?
Mineral spots can still form, but they wipe off easily without etching when maintained.
Does TAC protect tankless units?
Yes—TAC is widely used for scale reduction on tankless/coil heaters; we still suggest annual checkups.
Do I need pretreatment?
Often yes. Sediment, iron/manganese, and high chlorine/chloramine can harm media—filters address that upstream.
Maintenance?
Change prefilters on schedule; TAC media typically lasts years (varies by water and usage).
Can I switch to a softener later?
Absolutely—systems can be re-piped or combined (e.g., softener for whole-home + TAC for specific lines if desired).
More White Glove Plumbing Water Softening Equipment Services
Proudly Serving All of Orange County
Address: 1430 E Borchard Ave, Santa Ana, CA 92705
Phone: (949) 209-5206
Email: office@whitegloveplumbingca.com
White Glove Plumbing is locally based in Santa Ana and serves residential and commercial clients across Orange County with 24/7 emergency plumbing and water-damage restoration.
Our expert team handles leak detection, emergency plumbing, water extraction/dry-out, sewage cleanup, mold remediation, and reconstruction in top OC areas including Irvine, Anaheim, Santa Ana, Orange, Tustin, Costa Mesa, Newport Beach, Huntington Beach, Mission Viejo, Lake Forest, Fullerton, Yorba Linda, Laguna Beach, Dana Point, and San Clemente - plus surrounding neighborhoods.
Let’s start a conversation
Book Your Free Consultation call Now
Contact us:
CALL (949) 209-5206
1430 E Borchard Ave, Santa Ana, CA 92705