Bypass / Loop Installation in Orange County, CA
Planning for a softener or salt-free conditioner? A garage bypass/loop makes the future install fast, clean, and compliant. We add hot/cold tie-ins, a labeled bypass manifold, and a code air-gapped drain—with irrigation and hose bibs routed around the loop so outdoor taps stay hard (better for plants).
✓ Ready for upgrades: loop and valves in place
✓ Clean routing: irrigation/hose bibs bypassed
✓ Code drain: air-gapped standpipe or receptor
✓ Labeled valves: simple “service / bypass” operation
✓ Ready for upgrades
✓ Clean routing
✓ Code drain
✓ Labeled valves
What Is Bypass / Loop Installation (Garage Loop Setup)?
A pre-plumbed manifold and stub-outs that isolate indoor fixtures for future treatment while keeping exterior lines (irrigation/hose bibs) on hard water.
It includes full-port valves, a clearly labeled bypass, union connections, and a code-compliant drain with air gap for softener regeneration—plus tidy wall plates and mounting.
Why Choose White Glove Plumbing
Compliance & safety first: Air gap at the drain, accessible shutoffs, pressure checks, neat penetrations, and labeled valves.
Defensible documentation: Photos, pressure test results, materials list, and a simple owner map of what each valve does.
Beyond the loop: Add sediment/carbon prefilter, 120V outlet for control heads, or leak auto-shutoff if desired.
One accountable team: When you’re ready, we can install a metered softener or TAC conditioner on the loop—same crew, same standards.
Immediate Actions (What to Do Now)
Send photos: main shutoff, water heater, garage wall.
List bypasses: hose bibs, irrigation, fridge line.
Share water data: hardness and source (city/well).
Pick the spot: clear wall space near drain/power.
Call our 24/7 dispatcher—we’ll survey and schedule.
Common Situations We Handle
Remodels or new buyers planning a softener later
No drain nearby—need a standpipe with air gap
Irrigation/hose bibs that must remain untreated
Tankless/tank heaters needing scale control soon
Slab homes where future tie-ins would be invasive
Survey & Design
Locate main cold, map hose bib/irrigation branches, confirm drain route and optional power; choose PEX-A/Copper Type L based on site.
Isolate & Rough-In
Shut off, depressurize, and make clean cuts; pull supply out and return back to create the loop; maintain access to the main shutoff/PRV.
Manifold & Valving
Install full-port ball valves with union connections and a clearly labeled Service / Bypass arrangement; route irrigation/hose bibs ahead of the loop.
Drain & Air Gap
Add standpipe or receptor with a listed air-gap device; secure and label brine overflow termination for future softener.
Support, Label & Finish
Strap/saddle lines, add protective plates at studs, apply clean wall escutcheons, and label flow direction/valves.
Pressure Test & Document
Bring to pressure, check for leaks, purge air; deliver photos, valve map, and test results with future equipment recommendations.
What’s Included
Supply/return loop with full-port valves and unions
Labeled bypass manifold for quick service mode
Air-gapped drain (standpipe/receptor) and brine overflow route
Irrigation/hose bib bypass ahead of treatment
Pressure test & commissioning with leak check
Documentation packet (photos, map, materials)
Costs & Timelines (What to Expect)
Typical duration: 2–6 hours, same-day finish in most garages.
Cost drivers: Wall type (open studs vs. finished), distance to main, drain path/air gap, slab vs. crawl, and irrigation branch complexity.
Clear estimate: Line items for piping/valves, drain/air gap, wall finishes, and testing—no surprises.
Insurance & Compliance Support
Inspector-ready: Air gap, accessible valves, protective plates, and labeling.
Policy alignment: Local plumbing/backflow rules; COIs for HOAs/PMs.
Real-estate friendly: Adds value with a documented future-treatment path.
Risks of Waiting (Why Act Now)
Invasive future work (opening finishes or slab cuts)
No place to drain a softener later—project stalls
Scale damage to heaters and fixtures in the meantime
Confusing shutoffs without a labeled bypass manifold
Methods, Materials & Quality Standards
Materials: PEX-A with expansion fittings or Copper Type L, full-port brass valves, union connections, and rated supports.
Drains: Listed air-gap device to approved receptor; brine overflow routed safely.
Details: Proper slope on drain, protective stud plates, neat penetrations, and clear flow arrows.
Pressure/Temp: Test to local standard; verify PRV setting (typically 50–70 psi) and label.
Frequently Asked Questions
What exactly is a “loop”?
Two stub-outs with valves/unions that let us insert a softener/conditioner later—no major repipe.
Can you keep my hose bibs hard?
Yes—irrigation and hose bibs are routed before the loop to protect landscaping and save treated water.
Do I need power for the loop?
Only if your future unit needs it. We can add a 120V outlet nearby if requested.
Is a drain required now?
Yes—we install the air-gapped drain so the future softener is plug-and-play.
Will this work for salt-free TAC too?
Absolutely—the loop suits softeners or TAC conditioners (and prefilters).
Can you hide it cleanly?
We offer flush wall boxes/escutcheons and tidy routing; finishes coordinated on request.
More White Glove Plumbing Water Softening Equipment Services
Proudly Serving All of Orange County
Address: 1430 E Borchard Ave, Santa Ana, CA 92705
Phone: (949) 209-5206
Email: office@whitegloveplumbingca.com
White Glove Plumbing is locally based in Santa Ana and serves residential and commercial clients across Orange County with 24/7 emergency plumbing and water-damage restoration.
Our expert team handles leak detection, emergency plumbing, water extraction/dry-out, sewage cleanup, mold remediation, and reconstruction in top OC areas including Irvine, Anaheim, Santa Ana, Orange, Tustin, Costa Mesa, Newport Beach, Huntington Beach, Mission Viejo, Lake Forest, Fullerton, Yorba Linda, Laguna Beach, Dana Point, and San Clemente - plus surrounding neighborhoods.
Let’s start a conversation
Book Your Free Consultation call Now
Contact us:
CALL (949) 209-5206
1430 E Borchard Ave, Santa Ana, CA 92705