Bathroom Remodeling After Water Damage in Orange County, CA
Bathrooms are compact, complex systems—plumbing, ventilation, waterproofing, and finishes all packed into a small footprint. After a water loss, you need verified dry-down, code-correct roughs, and finishes installed to manufacturer specs. White Glove Plumbing & Restoration delivers turnkey bathroom remodeling after water damage: we fix the cause, document mitigation, rebuild the shell, and install tile, vanities, fixtures, and glass—coordinating insurance scope with any owner-selected upgrades.
✓ One accountable team: Source repair → dry-down → remodel.
✓ Insurance fluent: Covered work separated from upgrades.
✓ Tile/wet-area pros: Pans, membranes, and slope-to-drain done right.
✓ Live-through strategies: Containment, clean egress, temp solutions.
✓ One accountable team
✓ Insurance fluent
✓ Tile/wet-area pros
✓ Live-through strategies
What Is Bathroom Remodeling After Water Damage?
A coordinated reconstruction starting with a verified dry shell and ending with a finished bath.
We align the covered restoration work (replace what was damaged with like-kind) and any elective upgrades (tile patterns, fixtures, layout tweaks). You get a single PM, schedule, and punch list.
Why Choose White Glove Plumbing
Cause-to-cure continuity: Licensed plumbers correct the leak (supply, valve, drain, wax ring, pan), then our rebuild team restores finishes—no hand-offs.
Wet-area specialists: Shower pans, linear drains, waterproofing membranes, slope and flood testing to spec.
Code & quality: GFCI/AFCI, venting/CFM compliance, mixing valves/anti-scald, PRV where required.
Transparent finances: Clear separation of like-kind insurance scope and any owner-paid upgrades—clean paperwork, faster approvals.
Immediate Actions (What to Do Now)
Save mitigation documents (photos, moisture logs, demo notes); they drive rebuild approvals.
Decide what must match versus what you’d like to upgrade (tile, vanity, glass, lighting).
Avoid piecemeal hiring; scope gaps cause delays.
Call our 24/7 dispatcher—schedule a reconstruction planning visit to align budget, selections, and timeline.
Common Scenarios We Handle
Shower pan failures or failed grout/caulk leaking into walls and subfloors
Supply line/angle stop bursts under vanities or toilets
Toilet base/wax ring leaks (sometimes Category 2/3) requiring sanitation
Overtub overflows wicking into ceilings below
Cast iron/ABS drain issues and vent corrections uncovered during demo
Insurance rebuilds where you opt to upgrade tile, glass, and fixtures
Scope Alignment & Selections
Review mitigation records; define covered vs. upgrade items; finalize selections for tile, waterproofing system, vanity, tops, fixtures, lighting, and glass.
Permitting & Pre-Construction
Produce plans/details as needed; verify MEP requirements; order long-lead items (glass, custom vanity, specialty tile); baseline schedule set.
Shell Prep, Roughs & Waterproofing
Complete demo; framing repair/sistering; plumbing rough (valves, traps, drains, supply); electrical/GFCI/AFCI and fan venting; shower pan and waterproofing membrane installed; flood test as required.
Close-In & Tile Work
Insulation, moisture-resistant board where specified, flat substrate; set tile with proper coverage, movement joints, and slope; grout and seal per system specs.
Set, Hook-Up & Finishes
Install vanity/top, faucets, shower trim, toilet, accessories; lighting and fan; glass (measured after tile); paint/trim/caulk with wet-area sealants.
Punch, Clean & Handoff
Blue-tape punch; detail clean; water-temperature/flow tests; exhaust fan CFM check; deliver closeout packet (photos, SKUs, warranties, care).
What’s Included
Project management & permitting (planning, inspections, schedule control)
Plumbing/electrical roughs and ventilation to code (fan CFM, GFCI/AFCI)
Shower/tub waterproofing system (pan, membrane, flood test)
Tile installation (flatness, coverage, slope, movement joints)
Fixture/vanity/toilet set & hook-ups with tests and adjustments
Finish & documentation (paint/trim/caulk; photos, SKUs, warranties)
Costs & Timelines (What to Expect)
Typical duration:
Like-kind replacements (no layout change): 2–3 weeks after mitigation.
Upgrades (custom tile/glass, layout changes): 3–5+ weeks depending on lead times.Primary cost drivers: Tile/material selections, custom glass, waterproofing system, plumbing/electrical changes, cabinetry/tops, and permit cadence.
Budget clarity: We issue a line-item estimate separating insurance scope from owner-upgrades for smooth approvals.
Insurance & Claims Help
Carrier-ready docs: Mitigation photos/logs, room-by-room rebuild scope, comparable like-kind finishes.
Upgrades handled cleanly: Betterments tracked on a separate invoice—no commingling with claim dollars.
Supplements: Hidden issues (rot, subfloor compromise, noncompliant venting) documented with photos for carrier review.
Risks of Waiting (Why Act Now)
Hidden moisture drives mold/odor in wall and floor cavities.
Waterproofing failures recur if not rebuilt to system specs.
Fixture corrosion and finish staining worsen over time.
Cost/time creep from extended displacement and material lead times.
Methods, Materials & Quality Standards
Dry shell first: Moisture verification to local baseline before close-in.
Waterproofing: Systemized pans/membranes (sheet or liquid) with corners, seams, flood tests, and manufacturer-approved transitions.
Tile: Flat substrate (TCNA tolerances), correct trowel/notch and coverage, slope-to-drain (¼″ per foot typical), appropriate grout/sealer, and movement joints.
Plumbing: Pressure-balanced/thermostatic valves, correct trap/venting, PRV/backflow updates where required; set toilet with new seal/wax; leak tests.
Electrical & ventilation: GFCI/AFCI, dedicated circuits as required, exhaust CFM per code with exterior termination.
Site controls: Containment, HEPA air management, clean egress, and daily housekeeping for occupied homes.
Frequently Asked Questions
Can we reuse our existing tub or shower glass?
Sometimes. Glass is typically templated after tile; existing units rarely fit new layouts. Tubs are evaluated for condition and compatibility.
Do you always replace the shower pan?
After a leak or tear-out, yes—we install a new, tested system so the warranty and performance are intact.
Will you match our previous tile?
If discontinued, we’ll propose closest-match options or design a complementary upgrade, keeping insurance scope and upgrades separate.
Can we live at home during the project?
Usually yes. We set containment, maintain a clean egress, and can help with temporary bath solutions when possible.
How do you verify it won’t leak again?
We conduct flood tests, run fixtures under observation, verify slopes, and provide a closeout packet with photos and specs.
Do you coordinate with the adjuster?
Absolutely—estimating, supplements, and documentation are standard. Upgrades remain on a separate invoice.
More White Glove Plumbing Building Restoration Services
Proudly Serving All of Orange County
Address: 1430 E Borchard Ave, Santa Ana, CA 92705
Phone: (949) 209-5206
Email: office@whitegloveplumbingca.com
White Glove Plumbing is locally based in Santa Ana and serves residential and commercial clients across Orange County with 24/7 emergency plumbing and water-damage restoration.
Our expert team handles leak detection, emergency plumbing, water extraction/dry-out, sewage cleanup, mold remediation, and reconstruction in top OC areas including Irvine, Anaheim, Santa Ana, Orange, Tustin, Costa Mesa, Newport Beach, Huntington Beach, Mission Viejo, Lake Forest, Fullerton, Yorba Linda, Laguna Beach, Dana Point, and San Clemente - plus surrounding neighborhoods.
Let’s start a conversation
Book Your Free Consultation call Now
Contact us:
CALL (949) 209-5206
1430 E Borchard Ave, Santa Ana, CA 92705