Fire Damage Restoration in Orange County, CA
Soot, Smoke, and Odor Removal Through Full Mitigation & Rebuild by White Glove Plumbing
Fire affects more than what you can see—soot is corrosive, smoke odor embeds quickly, and sprinkler/hoseline water can trigger mold if left untreated. White Glove Plumbing delivers complete fire damage restoration: emergency board-up and tarping, debris/soot removal, odor neutralization, contents care, HVAC cleaning, and full reconstruction. One accountable team from emergency to final paint.


What Is Fire Damage Restoration?
Fire damage restoration returns a property to clean, safe, pre-loss conditions after fire, smoke, or puff-back events. Beyond removing debris, an effective project addresses soot chemistry (dry, wet, oily, protein), odor neutralization, corrosion risk on metals and electronics, water damage from suppression, and air quality. White Glove Plumbing designs a plan that matches the fire type, affected materials, and the building’s HVAC/airflow pathways.


Emergency Checklist (What to Do Now)
-
Do not re-enter until the property is cleared safe by authorities.
-
Avoid touching soot-covered surfaces—oils from hands can set stains.
-
Do not power on electronics or HVAC—soot can short components and spread contamination.
-
Open windows only if advised safe; otherwise keep areas contained.
-
Separate undamaged items from affected rooms if safe to do so.
-
Call our 24/7 dispatcher—we’ll secure the property and begin mitigation.
Common Causes We Handle
-
Kitchen/grease fires and protein smoke
-
Electrical shorts, appliance fires, space heaters, candles
-
Fireplace/chimney flare-ups and creosote issues
-
Furnace puff-backs and soot blow-outs
-
Garage/vehicle fires and stored chemical ignition
-
Wildfire smoke intrusion and ash fall
-
Sprinkler/hoseline water damage that follows a fire event
Why Choose White Glove Plumbing
-
Rapid emergency response: 24/7 board-up, roof tarping, and site stabilization.
-
Certified fire/smoke technicians: IICRC methods for soot removal, odor neutralization, and corrosion control.
-
Deeper deodorization toolkit: HEPA air scrubbers, hydroxyl generators, thermal fogging, and (when appropriate) ozone in unoccupied spaces.
-
End-to-end delivery: Debris removal, contents care/pack-out, HVAC cleaning, sealing/encapsulation, and full rebuild under one roof.
-
Insurance-ready: Photos, inventory, cleaning logs, and line-item estimates; we coordinate directly with most carriers.



Safety & Stabilization
Emergency board-up, roof tarping, utilities check, and hazard control to secure the structure and contents.
Assessment & Soot/Smoke Mapping
Identify fire type(s), test residues (dry/wet/protein), trace smoke pathways, and protect clean zones with containment and negative air.
Debris Removal & Source Elimination
Remove charred materials and loose soot; address primary odor sources to prevent re-contamination.
Surface Cleaning & Odor Neutralization
HEPA vacuuming, dry-chem sponges, targeted wet cleaning/alkaline rinses; deploy hydroxyl/thermal fogging and, when appropriate, ozone in unoccupied areas.
HVAC & Contents Care
NADCA-style duct cleaning and filter replacement; pack-out, inventory, and clean/restorables (textiles, soft goods, and selected electronics via vendor partners).
Verification, Sealing & Rebuild
Odor/particulate verification, encapsulation/sealer where indicated, and full reconstruction—drywall, paint, flooring, cabinetry, finishes.
What’s Included
-
24/7 board-up and roof tarping
-
Soot removal and corrosion control (metals/fixtures)
-
Advanced deodorization (HEPA, hydroxyl, thermal fog; ozone if appropriate)
-
HVAC cleaning and filter replacement
-
Contents pack-out, inventory, and cleaning
-
Full reconstruction and finish work (including color-match painting)

Costs & Timelines (What to Expect)
-
Mitigation window: Smaller smoke-only jobs can mitigate in 2–5 days; structural fire losses require phased work.
-
Rebuild timelines: Depend on permitting, materials, and scope; your PM will provide a schedule.
-
Cost drivers: Fire type (protein vs. synthetic), square footage, residue severity, contents volume, HVAC impact, and required rebuild.
-
Transparency: You’ll receive a line-item scope before work begins; we keep your carrier synced with the same documentation.

Insurance & Claims Help
-
Direct coordination with most carriers and IA/PA teams
-
Carrier-ready documentation: Photos, inventory lists, cleaning logs, deodorization reports, and estimates
-
Contents handling: Non-restorable item lists with photos; cleaning invoices for restorable items
-
Communication: Single point of contact to streamline questions, supplements, and approvals

Risks of Waiting (Why Immediate Mitigation Matters)
-
Acidic soot corrosion begins within hours on metals, electronics, and plumbing fixtures.
-
Odor sets into porous materials (drywall, insulation, textiles) and becomes far harder to remove.
-
Secondary water damage from suppression can spark mold within 24–48 hours if not dried.
-
Particulate exposure (fine soot) can spread through HVAC and cross-contaminate clean rooms.

Fire Damage Restoration Methods, Equipment & Deodorization Standards
-
Residue types addressed: Dry soot, wet/oily soot, protein smoke, fuel-oil/puff-back
-
Air quality controls: HEPA air scrubbers, negative air machines, hydroxyl generators, thermal fogging; ozone strictly in unoccupied, controlled conditions
-
Surface methods: HEPA vacuuming, dry-chem sponges, alkaline detergents, rinsing, media blasting (soda/dry ice) where indicated
-
HVAC care: Return/supply cleaning, coil checks, filter upgrade/replacement
-
Verification: Visual/olfactory checks, particulate capture, and post-deodorization inspections
Proudly Serving All of Orange County
Address: 1430 E Borchard Ave, Santa Ana, CA 92705
Phone: (949) 209-5206
Email: office@whitegloveplumbingca.com
White Glove Plumbing is locally based in Santa Ana and serves residential and commercial clients across Orange County with 24/7 emergency plumbing and water-damage restoration.
Our expert team handles leak detection, emergency plumbing, water extraction/dry-out, sewage cleanup, mold remediation, and reconstruction in top OC areas including Irvine, Anaheim, Santa Ana, Orange, Tustin, Costa Mesa, Newport Beach, Huntington Beach, Mission Viejo, Lake Forest, Fullerton, Yorba Linda, Laguna Beach, Dana Point, and San Clemente - plus surrounding neighborhoods.
Orange County Industries We Serve
Frequently asked questions
- 01
- 02
- 03
- 04
- 05
- 06
Let’s start a conversation
Book Your Free Consultation call Now
Contact us:
CALL (949) 209-5206
1430 E Borchard Ave, Santa Ana, CA 92705